Netgear Nighthawk M1 is a great choice for people who want to create a wireless internet connection for over ten devices at once. That’s because it’s a portable mobile hotspot device that allows the users to establish a strong wireless internet connection. However, Netgear Nighthawk M1 keeps disconnecting is a common error, which negatively impacts the connection. So, let’s check out the solutions!
Netgear Nighthawk M1 Keeps Disconnecting Fix
1. Reboot The Device
First of all, it’s recommended that you reboot the mobile hotspot device as it helps establish an error-free wireless connection. That’s because the hotspot device starts acting up when it’s used for too long. Having said that, just shut off the device and wait for thirty seconds before you turn on the hotspot device again. As a result, the impacted features will be restored, resulting in better connectivity.
2. Timeout Settings
Many people don’t know this but the mobile hotspot device is designed with the hotspot timeout settings, with which the device turns off when the devices aren’t connected to the internet. For this reason, you have to open the account settings and disable the “turn off mobile hotspot automatically” button. When it’s toggled off, the smartphones and laptops will remain connected to the mobile hotspot device. On the other hand, if you don’t want to toggle off the settings, you can configure this setting for thirty minutes or longer.
3. Battery Saver Mode
Another method to prevent disconnection issues is to check the battery saver and turn it off. Nighthawk Netgear M1 is designed with a battery life of over 24 hours with one full charge, which is why you don’t need to turn on the battery saver mode. That’s because the battery saver mode can limit the functionality of internet features, so turn off the battery saver mode on the mobile hotspot device.
4. Number Of Devices
Another method you can try is to reduce the number of devices. Netgear M1 has been designed to connect over twenty devices at once but the experts recommend that you don’t connect more than 15 devices, or else the hotspot device will start acting up. That being said, you should reduce the number of connected devices and it will improve the connection. Also, when you disconnect the devices from the mobile hotspot device, it’s recommended that you turn off Wi-Fi on the smartphones to prevent automatic connection.
5. Try To Reconnect
In case the devices are constantly disconnecting from Netgear Nighthawk M1, it’s time you disconnect the Wi-Fi on the device and reboot the device. When the device turns on, you have to connect to the Netgear connection again and it is likely to improve the internet connectivity.
6. Coverage
The hotspot device is designed to be used with the SIM card and if the SIM carrier doesn’t have network coverage in the area you are in, it will result in connectivity errors. That being said, you should check the network coverage map of the SIM card provider and change your location accordingly to improve the signal reception, promising better connectivity.