How To Tell If The Ethernet Port Is Bad?

how to tell if ethernet port is bad
how to tell if ethernet port is bad

There are tons of ports on a PC and an ethernet port is the best thing that you can use for networking. The ethernet port is not only specific for the PCs and it goes way beyond that. You get to see these ethernet ports on a lot of devices such as TVs, Gaming Consoles, and a lot more. So, if you feel like the ethernet port might have gone bad, here are a few things that you will need to check on.

How To Tell If The Ethernet Port Is Bad?

1) Apparent Damages

The first thing that you will need to check on is any wear and tear or some kind of damage at the ethernet port. The ethernet port has some sensitive wires inside that might get bent or broken. There are also some chances that you might be having the port lose at times and the ethernet plug will not be fixed properly.

Make sure to inspect the port carefully and clean it up if you are facing any issues with the connectivity on your ethernet port. Also, check on the wires inside the ethernet port and that will be helping you in figuring out the problem.

2) Trace the line

You will also have to make sure that you get the line traced. You will have to trace the cable all the way back to the router and check on the light on the port that it is connected to the router end. This is going to help you ensure that you can make it work in the right manner.

You will need to keep a close eye on the light and ensure that the light is solid green. If the light is not solid green, and flashing green or maybe amber. That can possibly mean that you have some issue with the ethernet port that you will have to get checked.

3) Change the port

There might be some other issue with the cable, connector or anything else that might be causing you to have the trouble. To rule out that possibility, make sure that you are connecting the same cable with some other ethernet port. That is going to help you out in solving the problem for good.

Once you figure out the problem, you can fix it effectively. However, there are still chances that the port might be unopened or there can be other possible reasons for the issues that you might be having. You will need to get that checked with a technician as a last resort.

Just make sure that you are getting both the ports checked on the modem/router end and the device end. This way, you will be able to figure out where the problem is and if an ethernet port is actually bad. The chances for these ethernet ports to go bad are really low as they are quite durable and are designed to take the stress. That is why you will not have to worry about anything and you will be able to figure out the actual reason pretty easily.

Leave a Comment